HomeProductsRooftop Pipe SupportsRTSH-P: Direct Mount Pipe Support
RTSH-P direct Mount Roof Pipe and Duct Support Eberl Rooftop Support Systems Division
RTSH-P direct Mount Roof Pipe and Duct Support Eberl Rooftop Support Systems Division

RTSH-P: Direct Mount Pipe Support

This Single Cross Brace Pipe Support features H-Stand design and mounts directly to your roof, providing superior wind and seismic bracing for your rooftop pipe and conduit.

Request A quote

The RTSH-P, Single H-Stand Pipe Support safely and securely mounts pipe and conduit on rooftops and is designed to maximize jobsite efficiency. Direct mount, bolt down bases are utilized to increase performance in areas where seismic or wind concerns are a factor. A welded cross brace and precut framing reduce hardware needs and allow for easy adjustability above 12”.

All H-Stands are compatible with 1-5/8” channel accessories. Pipe clamps, rollers, clevis assemblies, and pipe shields can be attached to meet the needs of any project.

Bolt down bases are interchangeable in most configurations to address any seismic or wind concerns that may be present.

Available finishes: Pre-galvanized, Hot Dip Galvanized, and Stainless Steel.

Part Numbers

Width = Cross Brace Width
Height = Upright Height

24″ Height 36″ Height 48″ Height 60″ Height 72″ Height 84″ Height 96″ Height 108″ Height 120″ Height
24″ Width RTSH2424 RTSH3624 RTSH4824 RTSH6024 RTSH7224 RTSH8424 RTSH9624 RTSH10824 RTSH12024
30″ Width RTSH2430 RTSH3630 RTSH4830 RTSH6030 RTSH7230 RTSH8430 RTSH9630 RTSH10830 RTSH12030
36″ Width RTSH2436 RTSH3636 RTSH4836 RTSH6036 RTSH7236 RTSH8436 RTSH9636 RTSH10836 RTSH12036
42″ Width RTSH2442 RTSH3642 RTSH4842 RTSH6042 RTSH7242 RTSH8442 RTSH9642 RTSH10842 RTSH12042
48″ Width RTSH2448 RTSH3648 RTSH4848 RTSH6048 RTSH7248 RTSH8448 RTSH9648 RTSH10848 RTSH12048
54″ Width RTSH2454 RTSH3654 RTSH4854 RTSH6054 RTSH7254 RTSH8454 RTSH9654 RTSH10854 RTSH12054
60″ Width RTSH2460 RTSH3660 RTSH4860 RTSH6060 RTSH7260 RTSH8460 RTSH9660 RTSH10860 RTSH12060
66″ Width RTSH2466 RTSH3666 RTSH4866 RTSH6066 RTSH7266 RTSH8466 RTSH9666 RTSH10866 RTSH12066
72″ Width RTSH2472 RTSH3672 RTSH4872 RTSH6072 RTSH7272 RTSH8472 RTSH9672 RTSH10872 RTSH12072
78″ Width RTSH2478 RTSH3678 RTSH4878 RTSH6078 RTSH7278 RTSH8478 RTSH9678 RTSH10878 RTSH12078
84″ Width RTSH2484 RTSH3684 RTSH4884 RTSH6084 RTSH7284 RTSH8484 RTSH9684 RTSH10884 RTSH12084
90″ Width RTSH2490 RTSH3690 RTSH4890 RTSH6090 RTSH7290 RTSH8490 RTSH9690 RTSH10890 RTSH12090
96″ Width RTSH2496 RTSH3696 RTSH4896 RTSH6096 RTSH7296 RTSH8496 RTSH9696 RTSH10896 RTSH12096

  • For Double Cross Brace, add “-D”
  • For Hot-Dip Galvanized, add “-HG”
  • For RTSSPB20HG, Direct Mount Bases, add “-P”

Example: RTSHXXXX-P-HG denotes an H-Stand with direct mount bases in HG finish

***** Part numbers listed include (2) RTSF21 rubber bases, (2) Uprights, and (1) Cross brace in pre-galvanized finish *****

Typical Steel Pipe Weights for H-Stand Loading

Surface Area of RTSF21 Base: 211.75 in2

Surface Area of RTSPUC Base: 71.50 in2

Pipe Size Water Filled Pipe Weight (lbs/ft) Total Weight at 6ft Spacing (lbs) Total Weight at 8ft Spacing (lbs) Single RTSPUC PSI
6ft		 Single RTSPUC PSI
8ft		 Double RTSF21 PSI
6ft		 Double RTSF21 PSI
8ft
1″ 2.06 12.36 16.48 0.348 0.405 0.194 0.216
2″ 5.11 30.66 40.88 0.604 0.747 0.238 0.274
3″ 10.78 64.68 86.24 1.079 1.381 0.318 0.381
4″ 16.30 97.80 130.40 1.543 1.999 0.396 0.485
5″ 23.20 139.20 185.60 2.122 2.771 0.494 0.615
6″ 31.50 189.00 252.00 2.818 3.699 0.612 0.772
8″ 50.10 300.60 400.80 * * 0.875 1.123
10″ 74.60 447.60 596.80 * * 1.222 1.586

* Application not permitted
** ASTM A53-86 Schedule 40 pipe
*** PSI Calculation for a single pipe
**** Weights include that of an RTSPUC1 or a 75lb H-Stand

Win Win Situation!

“Thank you for your immediate attention to our request. Your ability to help resolve a time sensitive issue, provide clear concise information and willingness to think outside the box made this a win win situation. We look forward to working with you in the future.”

Bill | VHV Company
Great Lead Time & Service!

“The lead times on the RTS materials have been great, you get them done when or before we need them and the service has been great.”

Joe | Mollenberg Betz
Highly Recommended!

“Eberl is easy to work with and they provide quality products. Standard items are available quickly and installation is simple and straightforward. Custom products or projects requiring seismic or wind certification can be provided with as much detail as required to ensure a successful installation. Any issues we have run into with the customer or end user have been dealt with quickly and appropriately.  We would absolutely recommend them to anyone looking for these type of products.”

Brian | Samuel Tepp Associates, LLC
PROMPT SERVICE!

“Thanks for the prompt service, in providing us with our order, so that we could complete our job in a timely manner!”

Don | Power Engineering Corp
Great Customer Service!

“Thanks guys I appreciate the quick responses and great customer service!”

Steven | Climate Engineers
Comments (0)